Connecting an OX1 directly to a Wi-Fi network without a mobile device.


Applies to

OX1

Introduction

Since the release of OX1 software version 1.9, it is now possible to connect the OX1 directly to a Wi-Fi network without a mobile device with the TestFlow Mobile application. This feature was released in 2022 and the procedure below provides details.

Procedure to follow

1. Update the SW on your OX1 if required. Please consult this knowledge article.

2. On the OX1 go to the Settings Menu

3. If not yet enabled, enable Wifi.

4. Select the network you wish to connect to.

5. If the network has a security password, enter it. The OX1 will then be connected to your network.