Batch processing FIP-500 test results in FastReporter 3 versions 3.9 and later


Applies to

FIP-500, FastReporter 3 Versions 3.9 and later

Introduction

As of FastReporter 3 version 3.9, it is possible to open FIP-500 test results in batch and to generate reports, in either Excel or PDF.

Procedure to follow

  1. Open FastReporter 3 version 3.9 or later on a PC
  2. Turn on the FIP-500 and connect to the PC with the USB cable
  3. In FastReporter, click on Instrument

Graphical user interface, applicationDescription automatically generated

  1. At the upper left click on Synchronize
  2. Click on “FIP-500” to open Instrument Result Management

Graphical user interface, text, applicationDescription automatically generated

  1. In Instrument Result Management, select your test results then click Download

Graphical user interface, text, applicationDescription automatically generated

  1. Click Yes once test results are downloaded
  2. You will be able to view all captures in Measurements

Graphical user interface, applicationDescription automatically generated

  1. To generate a report click the Report menu then select the format

Graphical user interface, applicationDescription automatically generated

  1. Click From New template at the upper left then use the appropriate report template
  2. Click Generate at the bottom right of the Report window

NOTE: If you generate your report from the FIP-500 with table of Content template and are viewing the report, you may click on the link in the Identifiers column to get FIP results; at the end of the FIP results page click Back to Summary to see the Test Result list

TableDescription automatically generated