EX1/EX10 Speedtest - Test Aborted - Report Count Exceeded

Applies to



The EXFO EX1/EX10 will save a maximum of 500 reports to the internal storage. Once the storage is full, the Speedtest cannot be run. If the test is started, the device will display - Test Aborted - Report Count Exceeded

Procedure to follow

Here are the steps to select and delete reports from the EX1/EX10 internal memory storage

  • Select the Menu at the top left
  • Enter into the Reports page
  • Touch on the gauge () to the left of the report to bring up an additional menu
  • To select all reports, touch on the check-mark () on the top right of the application; to select only a few reports, touch on the gauge () of the preferred reports
  • Use the trash can button () to delete the selected test reports