Generating and saving a test report in NetBlazer and/or Power Blazer applications


Applies to

FTBx-88xxx Series

Introduction

Use the following steps below to generate and save a test report when using the NetBlazer and/or Power Blazer software.

Note that it is not mandatory to start a test to generate a report although it is mandatory that any on-going tests need to be stopped or completed

Procedure to follow

  1. Launch the NetBlazer or Power Blazer application, available from the Toolbox application on the desktop

 

A picture containing graphical user interfaceDescription automatically generated    Graphical user interface, applicationDescription automatically generated

 

  1. Select the "Report" button, located below the “Start” button

 

Graphical user interface, applicationDescription automatically generated

 

  1. If needed, use the Job Information fields to detail the report

 

Graphical user interface, text, application, emailDescription automatically generated

 

  1. To automatically generate a report after every test, select the “Auto-Generate Report” check-box. The file names will be generated automatically

 

Graphical user interface, text, application, emailDescription automatically generated 

 

  1. If a custom file name is required, uncheck the “Auto-Generate File Name” selection and edit the File Name field.

 

Graphical user interface, text, applicationDescription automatically generated

 

  1. Use the “Browse” button to identify the report storage location. The default report location is in the My Documents folder, within the 810-880 NetBlazer subfolder for NetBlazer reports or the 88000-Powerblazer subfolder for Power Blazer reports. It is possible to save the report directly to a USB storage device.

 

Graphical user interface, applicationDescription automatically generated

 

  1. Select the format which you wish to save the report. PDF and HTML are available; PDF is default.

 

Graphical user interface, applicationDescription automatically generated

 

  1. Select the “Save Report” button to generate and save the report.

 

Graphical user interface, applicationDescription automatically generated