FTBx-88xxx Series

Use the following steps below to generate and save a test report when using the NetBlazer and/or Power Blazer software.

Note that it is not mandatory to start a test to generate a report although it is mandatory that any on-going tests need to be stopped or completed

1. Launch the NetBlazer or Power Blazer application, available from the Toolbox application on the desktop

2. Select the "Report" button, located below the “Start” button

3. If needed, use the Job Information fields to detail the report

4. To automatically generate a report after every test, select the “Auto-Generate Report” check-box. The file names will be generated automatically

5. If a custom file name is required, uncheck the “Auto-Generate File Name” selection and edit the File Name field.

6. Use the “Browse” button to identify the report storage location. The default report location is in the My Documents folder, within the 810-880 NetBlazer subfolder for NetBlazer reports or the 88000-Powerblazer subfolder for Power Blazer reports. It is possible to save the report directly to a USB storage device.

7. Select the format which you wish to save the report. PDF and HTML are available; PDF is default.

8. Select the “Save Report” button to generate and save the report.