Reset procedure for platforms with Windows 10 operating system


Applies to

FTB-1V2, FTB-1V2-Pro, FTB-2, FTB-2-Pro, FTB-4 with Windows 10 OS

Introduction

This procedure will explain how to “Reset” EXFO platforms (Windows 10 ONLY) to factory settings.

Note: If you’re unsure which Windows version you have, swipe left from right edge of the screen then click “All Settings” at the bottom left corner, then click «System» scroll down and then «About».

Procedure to follow

Before Starting

Ensure the unit is connected to an AC outlet during the procedure

After the "Reset" is complete:

  • The unit will be reverted to the state in which it was when the WIM file was created
  • All data files will be lost once the restore is complete
  • If you installed products and updates since the WIM file was created, you will have to reinstall them
  • Backup any important data


Step-by-step Procedure

  1. From the “Start” menu click “Settings”


  1. Scroll down then click “Update and Security”

  1. Click “Recovery”


  1. Under “Advanced startup” click “Restart now”



  1. Tap “Troubleshoot”



  1. Tap “Platform Imaging Utility”


  1. Select “Reset this unit to factory settings” then click “Next”


  1. Read the warning then click "Start" to restore the unit with the selected System Image.


  1. The unit will restart automatically, and the Reset will take approximately 25 minutes. During this period, you’ll see the progress increase towards completion.


  1. Once the Reset is complete you will be prompted to accept the license and safety terms and then follow the on-screen instructions; your mainframe will be ready to use.