How to transfer files from the MAX Optical tester using a USB memory device


Applies to

MAX-700B series, MAX-700C series, MAX-FIP, MAX-900 series, MAX-5205

Introduction

This procedure shows you how to transfer files from the MAX Optical tester using a USB memory device

Procedure to follow

The MAX optical tester comes installed with an application called DATA Mover which can be found on the home screen of the unit:

To transfer files with the Data Mover

1. Connect a USB memory device to one of the two USB ports

2. From the Home screen tap the Data Mover icon

Data Mover selection

3. Select or clear the check boxes to adjust the folder selection to your needs

Destination Media

4. If necessary, under Destination media, select the desired USB memory device

5. Tap Copy. The selected files will remain on your unit after the transfer is completed

Data Mover Copy