Applies to
EX1/EX10
Introduction
The EXFO EX1/EX10 will save a maximum of 500 reports to the internal storage. Once the storage is full, the Speedtest cannot be run. If the test is started, the device will display - Test Aborted - Report Count Exceeded
Procedure to follow
Here are the steps to select and delete reports from the EX1/EX10 internal memory storage
- Select the Menu at the top left
- Enter into the Reports page
- Touch on the gauge (
) to the left of the report to bring up an additional menu
- To select all reports, touch on the check-mark (
) on the top right of the application; to select only a few reports, touch on the gauge (
- Use the trash can button (
) to delete the selected test reports