MAX-700B/C/D series, MAX-FIP, MAX-900 series, MAX-5205

This procedure shows you how to transfer files from the MAX Optical tester to a USB drive using the DATA Mover application

The MAX optical tester comes installed with an application called DATA Mover which can be found on the home screen of the unit:

To transfer files with the Data Mover

1. Connect a USB memory device to one of the two USB ports

2. From the Home screen tap the Data Mover icon

3. Select or clear the check boxes to adjust the folder selection to your needs

4. If necessary, under Destination media, select the desired USB memory device

5. Tap Copy. The selected files will remain on your unit after the transfer is completed

As an alternative method you can use the File Manager from the MAX Optical testers desktop this is covered in following knowledge base article: 

MAX Optical tester transferring files to a USB thumb drive using the File Manager application.