Netblazer / Power Blazer modules

This procedure will help to configure the device for a smart loopback test.

Steps to use the Smart Loopback

1. Open the Mini Toolbox app:

2. Open the Netblazer/Power Blazer app:

3. Open the Smart Loopback app in the list of applications:

4. Once you are in the test configurator menu, the Modify Structure option allows the selection of the interface rate and select OK:

5. In the Test Configurator, you can change and verify the interface, the network, and the SFP+ info:

6. The next menu is the smart loopback menu. The Mode determines at which layer the Smart Loopback address/port swapping operation will be:

7. Start the test. Traffic data will be presented in the Results screen